Are you a CCNA looking to refresh your Ninja Networking Skills? Are you studying to become Juniper Certified? Have fun with this quiz involving the TCP/IP and OSI models, routers versus switches, and collision versus broadcast domains!
Check out my latest Juniper training course at CBT Nuggets!
How did you score? Let us know in the comments section below!
JNCIA-Junos OSI and Things That Use It Quiz
This quiz hits the TCP/IP and OSI Models, routers and switches, and the concept of collision domains and broadcast domains. Enjoy!
Start
Congratulations - you have completed JNCIA-Junos OSI and Things That Use It Quiz.
You scored %%SCORE%% out of %%TOTAL%%.
Your performance has been rated as %%RATING%%
Your answers are highlighted below.
Question 1
Which of the following statements are correct regarding broadcast versus collision domains? Choose all that apply.
A
A VLAN permits a broadcast domain to scale across multiple physical devices
B
Broadcast frames are first sent to a gateway device, and then propagated to all other devices in the segment
C
Broadcasts are always constrained to a single physical network device, hubs are an exception
D
Broadcasts are sent using a special broadcast address that all stations "listen on"
Question 1 Explanation:
Remember, while network devices can constrain broadcasts, VLANs used across switches can actually ensure that broadcast frames are propagated across switches.
Question 2
You have a Juniper switch that contains three VLANs. Which statement is true about this device?
A
The switch will always flood broadcast frames between the three VLANs
B
The switch will flood a broadcast into the same VLAN where it was created
C
A router is used to flood the broadcast frame into all of the VLANs
D
Each VLAN requires the same default gateway configured for proper inter-VLAN communication
Question 2 Explanation:
One of the purposes of the VLAN is to constrain broadcast traffic to the single VLAN.
Question 3
A hub is still being used in a network run by a very nostalgic engineer. He has connected two servers and four workstations to this device. How many collision domains are there?
A
Four
B
Six
C
One
D
Two
Question 3 Explanation:
Remember, the challenge with a hub is one large collision domain for all the connected devices. This requires a half duplex configuration of the devices, and results in collisions in the network.
Question 4
Which are elements you can expect should there be a collision in your Ethernet network? Choose two.
A
A jam signal
B
A retransmission by the default gateway
C
A central arbitrator intervention
D
A retransmission after a random backoff
Question 4 Explanation:
CSMA/CD uses a jam signal to notify devices of a collision as well as a random backoff timer to control retransmissions.
Question 5
You have a Juniper router connected to the Internet and two switches. Each switch connects to five hosts. How many collision domains exist in this network?
A
11
B
12
C
1
D
13
Question 5 Explanation:
There is a collision domain created in this topology between each network device. 1 for the Internet connection. 2 for the two connections to the switches, and ten collision domains for each of the hosts.
Question 6
Segments are the PDU for which layer of the OSI model?
A
Physical
B
Transport
C
Network
D
Data Link
Question 6 Explanation:
From the bottom up - it is Bits, Frames, Packets, Segments.
Question 7
Which layer of the TCP/IP model ensures that packets are routed to logical addresses?
A
Host-to-Network
B
Data Link
C
Internet
D
Application
E
Transport
Question 7 Explanation:
The Internet layer is the equivalent of the Network layer in the OSI model.
Once you are finished, click the button below. Any items you have not completed will be marked incorrect.
Get Results
There are 7 questions to complete.
←
List
→
Return
Shaded items are complete.
1
2
3
4
5
6
7
End
Return
You have completed
questions
question
Your score is
Correct
Wrong
Partial-Credit
You have not finished your quiz. If you leave this page, your progress will be lost.
Looking to get certified in the other “white meat” when it comes to your network plumbing? CBT Nuggets is thrilled to announce the re-release of one of its most popular courses – JN0-102. This is the required course for students to achieve their Juniper Networks Certified Associate (JNCIA-Junos) certification.
While this course is critical because it introduces key networking topics and provides a hugely important look at Juniper technologies, the course is also imperative since it is the prerequisite certification for all of the major Juniper cert tracks including Enterprise, Service Provider, and Security.
This re-release of the course is taught by none other than Anthony Sequeira and will feature incredible new content heavily requested by students. This includes Tales from the Trenches and Pop Quiz features that focus on Real World issues and Exam prep respectfully.
The Nuggets for this course follow the JN0-102 blueprint directly and include the following areas:
