Category Archives: CCENT

CCENT (ICND1 100-101) IP Services Challenge

CCENT, , , ,

CCENT ACLs

CCENT Fun!

I have some new software that I will be using to create all types of new challenges for you here at AJSNetworking.com in the area of CCENT and other topics. Until then, let’s try a little Access Control List scenario the old fashioned way! Submit your configuration in the comments below and I will provide your score. Good luck!

CCENT ACL Scenario 1:

R1-Gi0/0———-Gi0/0-R2

Configure a named standard access list on R1 with the following parameters:

  • Use an ACL name of MYCCENTACL
  • Block all traffic from 10.10.10.100, and ensure other systems are not blocked; use the HOST keyword
  • Assign this ACL inbound on the Gi0/0 interface of R1

Remember, post the R1 configuration in the comments below for grading. Good luck and do not rush your answer!
Cisco Learning Network Store Promotions Page

CCENT (ICND1 100-101) OSPF Scenario Challenge

CCENT, , ,

CCENT fun!

CCENT Fun!

I have some new software that I will be using to create all types of new challenges for you here at AJSNetworking.com in the area of CCENT and other topics. Until then, let’s try a little OSPF scenario the old fashioned way! Submit your configuration in the comments below and I will provide your score. Good luck!

CCENT OSPF Scenario 1:

R1-Gi0/0———-Gi0/0-R2

R1 and R2 are connected by the 10.10.10.0/24 network. .1 and .2 are the interface IP addresses for each device respectively. R2 has been completely configured (correctly) for OSPF operations in Area 0 with R1. R1 contains the following loopback addresses:

  • Lo0 – 192.168.1.1
  • Lo1 – 192.168.2.1
  • Lo2 – 192.168.3.1

Your mission, should you choose to accept it, is to provide the configuration for R1 that meets the following conditions:

  • Use a process ID of 101
  • Use two network statements to cause all interfaces (Gi0/0, Lo0, Lo1, Lo2) to participate in OSPF
  • Ensure a Router ID of 192.168.1.1

Remember, post the R1 configuration in the comments below for grading. Good luck and do not rush your answer!